how to make a round wooden hot tub How to Build a Wooden Bucket

by:ALPHA     2019-06-15

As the age grows, the cask usually makes the weather natural, and as a flower grower, the cask becomes a delightful courtyard decoration.Barrels made of cedar will turn into beautiful silver as they grow older, while adding copper bands will make the barrels more rustic.Over time, copper turns green, complementing almost any style of garden.Several buckets of different sizes add a lot of visual interest to the garden space.Set the table saw to do 15-degree cut.Make a 15-Two 10 degree cutsInch edge of 1-1by-2-by-10-Cedar board in inches, this will be the side of the bucket.The 15-Degree cutting will allow them to come together from the round barrel shape.Using drill bits and 1/2-Inch drill bit, drilled through one end of 1-2by-2-by-10-Cedar board in inches.The rope will go through these holes.Will all 1-by-2-by-10-The Cedar plates in inches form a circle together.Place two plates with holes on the opposite side.Apply the wood glue to the edge of each plate, where they will form a connection.Clamp the barrel side together using a ratchet fixture.Wipe the excess glue with a wet rag.According to the instructions on the glue container, allow the glue to dry.Package a 1/2-by-38-The inch copper tape is 3 inch from the top and 3 inch from the bottom of the barrel side.These bands will be decorative bands on barrels.Secure the strap in place with copper nails and hammers.Make room for about every 2 inch nails.Set the barrel side component at 3/4-by-12-by-12-Cedar board in inches.Track the bottom of the Assembly with a pencil.Cut out the pencil line with a jigsaw puzzle;This piece will turn into the bottom of the bucket.Fix the bottom of the barrel to the side with copper nails and hammers.To form the barrel handle, please put 16-Inch part of 3/8The Inch of rope runs through two holes on the top of both sides.Tie a knot at each end and fix the rope on the bucket.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...