how to make a wooden hot tub How to Build Your Own Hot Plate

by:ALPHA     2019-06-19









In the laboratory, hot plates can be used to cook, maintain the temperature of food or drink, or to heat chemicals.The Hot Plate can prove to be a very useful equipment that can meet various needs.Drill a hole in each of the 4 corners of the ammunition box, about 2 inch from the top.Put the bolt into each hole and tighten it with the nut.Drill a hole large enough at the bottom on one side of the cartridge box to let the plug go through.Pack asbestos.Cover the rod tightly with a heating wire, no more than 1mm between each pack.Do not touch the heating wire itself when packing.Reserve about 5 inch of the heating wire at the end of the bar.Place the electric socket and wire into the cartridge box and pass the plug through the hole drilled at the bottom of the box.Wrap the remaining 5 inch of the wires inside the lamp socket and firmly press to the bottom and side of the lamp socket where the bulb normally goes.Use pliers to wrap an asbestos rod wrapped with a heating wire into a circle or oval shape, placed inside the cartridge box, right above the robot in each corner.Fix the coil on the bolt and create a floating heating furnace coil inside the cartridge box.Place the ammo box on the pan holder and plug the light line into the socket so your hot plate can be heated.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...